Timber and exterior carpentry detail completed by Gulf Builder
07 / Carpentry & Decorating

Measured carefully. Finished cleanly.

Carpentry and decorating that complete the whole renovation.

From structural timber and bespoke details to flooring and final decoration, Gulf Builder carries the finish through with the same care as the main build.

Plan the finishSee the work
The brief

Accurate timber work and a finish that respects the room.

Good carpentry begins with accurate setting out and an understanding of how the finished room will be used. Every junction, opening and visible edge needs to work with the wider renovation.

Our team coordinates structural timber, fitted details, preparation and decoration so the final result feels deliberate rather than added at the end.

01Accurate setting out
02Bespoke timber work
03Surface preparation
04Clean decoration
Project journal / London

From structural timber to the visible final detail.

The team formed new openings, installed timber components and completed visible surfaces as one coordinated package.

FIG. 01 / OPENING DETAIL
Timber opening formed by Gulf Builder carpenters
The new opening was measured and formed around the existing structure.
FIG. 02 / ROOF DETAIL
Timber roof detail prepared by Gulf Builder
Timber and weatherproof junctions were set out carefully before the visible finish.
FIG. 03 / TIMBER BATTENS
Timber battens installed by Gulf Builder
Battens were aligned consistently to create a sound base for the next construction layer.
FIG. 04 / EDGE DETAIL
Detailed timber edge prepared during Gulf Builder carpentry work
Critical edges were measured and finished to meet the adjoining construction cleanly.
FIG. 05 / STRUCTURAL TIMBER
Structural timber installed by Gulf Builder
The structural timber was secured and checked before the opening was completed.
FIG. 06 / FLOOR FINISH
Timber floor finish completed during a Gulf Builder renovation
The timber floor was restored and finished to bring warmth back into the completed room.
How we build

A precise route from measurement to final decoration.

01

Measure and set out

We confirm dimensions, junctions and the intended use before timber is cut.

02

Build and fit

Structural and visible timber components are installed accurately.

03

Prepare the surfaces

Edges, walls and joinery are made ready for a clean final finish.

04

Decorate and hand over

Decoration and detailing complete the room ready for everyday use.

Start a conversation

Need carpentry or a complete decorating finish?

Tell us what needs to be built, restored or finished and we will help define the next step.

Discuss the finish